Infrared Verifier Card

Model: IRC

 The IR verifier is a low cost way to visually confirm the IR LED’s in security products are powered and working.  Since a typical security installation is done during daylight hours there is no way for the installer to easily confirm IR LED’s are working.  Use this card to verify any IR emitter is working in addition to being used as a beam locator.  The card is designed as a transmissive product so you can hold it in front of IR emitters and see the phosphor glow through the card.  The phosphor used in the card is sensitive in frequencies from 808nm to 1400nm so it is effective with all security IR emitters.  The large 1 ¾ inch diameter active area makes for easy use with no critical alignment needed.  Easily carry in a shirt pocket or worn around the neck on a lanyard, this is a must have tool for anyone in the installation business.

Specs:

• Card Size: 3.4 x 2.1 x .040 thick
• Transmissive Phospor area
• Sensitivity Range: 808 - 1400nm

Applications:

• Service and Maintenance to confirm IR LED's are working.
• Locate IR Beams